Re: Need Info on Aftermarket Hood and Customizing Suggestions

From: Alan Short (ashort@flash.net)
Date: Wed Jan 20 1999 - 14:45:49 EST


a strain wrote:
>
> I have decided to dress up the R/T as follows(any suggestion very welcome):
>
> ARE fiberglass tonneau cover
> Aftermarket Hood - see below
> Superbee wrap around type of strip with either R/T and/or 360 in the a
> stripe break on the Qtrs.
> Leather trim interior - need source
> 1970 Go-wing on the rear of tonneau (this is a thought any comments positive
> or negative welcome). I have one to prop on and see how it looks
>
> I am still trying to find the source that the dealer in Marietta, GA uses
> for leather accents?
>
> Also need to know the manufacturer of the hood at the following link
> http://pegasuscustom.com/dakotahood97+ra300.JPG
>
> TIA
> Later
> Allen Strain
> 67 Cuda - 71 Twister (V3X) - 78 Magnum - 85 Ramcharger - 99 RC R/T
Oh, you might want to wait a month or so on the hood. I believe there is
a 2/3 replica Hemi shaker hood in the works.I hear the leather Durango
seat covers will retro fit the dak seats, not for sure though. I would
like leather too since I have a Reg Cab and no back seat to refit.
Alan S.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:10 EDT