At least nobody has opened up the silicon/silicone argument again... It
would be terrible for someone to raise that issue! ;)
--Brett (running for cover...)
Just got the first estimate back on the Dak damage: $2500 and change! Ouch!
:(
-----Original Message-----
From: HKUSP40578@aol.com [mailto:HKUSP40578@aol.com]
Sent: Wednesday, January 06, 1999 12:15 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Silicone Coating (mike / Kyle)
In a message dated 99-01-06 14:55:36 EST, you write:
<< Kyle/Mike, I take it that the Fan Clutch has silicone in it? I saw the
bottom of the post where it said now covered with silicone or somthing
like that and I took it for some type of wax, paint sealer. Boy, what a
dope I am! Bob
>>
Your no dope, man. I dont know half the stuff some of the fellow DMLers
know,
but that is what the DML is for, to educate and gain knowledge on Dako/auto
related information. From what I understand, the clutch has silicon in it
and
based on how it cold/hot it is, is when the fan actually is cooling down the
engine/radiator.....or something similar to that :)
Kyle
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:53 EDT