Monday I'll be getting the prices from the local warehouse. ;)
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Kevin (MAGNUM S/T)
Hoegen
Sent: Sunday, August 26, 2001 8:02 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: High-flow CAT on 3.9L
And Speedtweaks will be selling them when?? LOL...just kidding bud
I was concerned that with my Flowmaster Dual setup, the addtional
compression loss associated with a high flow cat would be too much.
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000301c12ded$154e8110$040aa8c0@homenet.com...
>
> CarSound...the only way to go on the V6. :)
>
> (Been running one for quite some time now...no problems.)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Kevin (MAGNUM
> S/T) Hoegen
> Sent: Saturday, August 25, 2001 11:09 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: High-flow CAT on 3.9L
>
>
> Anyone put a High flow CAT (or customize the stock CAT..aka empty
> shell
> cat) on a 3.9L. I'm curious if this results in too much low end loss.
>
> tnx
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:33 EDT