Not sticking up for the garage and I didn't read all the posts but I am also
a repair shop and I often see more than one sensor bad. Sometimes the first
one doesn't trip a code sometimes one feeds back to another and hurts it. I
lots of that with fuel pumps.
GEORGE!!
----- Original Message -----
From: "Mark Kuzia" <flyboy01@mediaone.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, August 14, 2001 10:24 PM
Subject: Re: DML: Update on Dead Dakota!
> I would shove that $900 bill up their @$%#! It is most likely a bad power
> wire, I did not see the beginning of this post, but there is NO reason to
> replace more that 1 sensor. I HAVE NEVER SEEN TWO SENSORS FAIL AT ONCE!
They
> are trying to rip you off. What you should do is tell them to stop and fix
> the wire right in front of them. See what they say to that!
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> 1994 Dakota 15.36 @ 91.56 mph
> ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
>
>
>
> ----- Original Message -----
> From: "mike kulczycki" <dakota1994@hotmail.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, August 14, 2001 3:23 PM
> Subject: Re: DML: Update on Dead Dakota!
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:25 EDT