Re: pulling engine codes.

From: bernd@texas.net
Date: Tue Oct 31 2000 - 16:04:18 EST


Codes: http://www.dakota-truck.net/CODES/codes.html

As for the ON/OFF routine, on a '97...here's what ya do: (And don't disconnect
the battery for this either.)

Turn the key to the ON position three times (don't hit start). On the fourth
time, leave it in the ON position and watch the odometer for the codes.

- Bernd

> Could someone give the site for information on how to decipher engine code
> problems. I had it before but lost it. Earlier someone mentioned about
> disconnecting negative battery, turning key to start and off three times but
> also mentioned holding down the odometer/tripmeter button at the same time.
> I never heard of holding this button down, do you have do this on a 1997 DAK
> 318?
>
> Thanks
> Jay
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:39 EDT